3 Legged Thing Winston 2.0 Tripod (Gray)

3 Legged Thing Pro Range Winston 2.0 Carbon Fibre Tripod SystemThis gray 3 Legged Thing Winston 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 56.8″ height or can be combined with the center column to form a monopod with up to 75.9″ in height. Tripod heads that are compatible with a 3/8″-16 mount can be connected to the top of the Winston 2.0 Tripod. When configured as a tripod, the Winston 2.0 Tripod supports up to 88.0 lb and measures 24.0″ when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 5.7″ when its push-and-pull, rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 55.0″ or 72.9″ with the center column fully raised. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil. For added versatility, the Winston 2.0 Tripod’s three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.Use and HandlingSupport system with three detachable legs and removable center columnEach leg can be configured as a monopod with up to a 56.8″ height or can be combined with the center column to form a monopod with up to 75.9″ heightAs a tripod, supports up to 88.0 lbPush-and-pull center column for rapid camera, lens, or sport optic positioningCenter column D-ring to accommodate ballast for additional stabilityCan be set for a minimum height of 17.5″ or 5.7″ without the center columnAll three legs can be extended in the tripod configuration to obtain a maximum height of 55.0″ or 72.9″ with the center column fully raisedCenter column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod’s legs instead of above themLegs each feature 3 sections with twist locks for rapid deployment and can be independently spreadLegs can be locked at 23, 55, or 80° anglesRubber feet help to enhance stability on a wide variety of surfacesWeighs 3.8 lb and measures 24.0″ when all three legs are reversed 180° and foldedRubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soilRemovable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod3 Legged Thing Toolz multi-tool to adjust miscellaneous component screwsCarry bag with strap for storage and transportConstruction DetailsCarbon-fiber legs3/8″-16 mount